The cantilever lift is specially designed to suit trucks, trailers and semi-trailers of all capacities, due to its wide range of 6 arm lengths and different platforms.

• Widely used for warehouse and factory operations
• Especially designed for palletized loads transported by manual pallet trucks or powered pallet trucks
• Moving heavy equipment either onto or off a vehicle in a level mode

• Fully hydraulic dock levelers offer Button-operation to control deck and lip functions, including deck raise and lip kick out and return to stored position. And lip bumper and grease fitting on lip hinge are standard with each unit.
• The telescopic is supported by fully hydraulic system, with button operation to control and lip functions, including deck raise and lip extend and return to stored position.

• Offering a range of lengths, widths, and dynamic capacities, the Edge-of-Dock leveler combines rugged durability with a competitive price.
• Edge-of Dock Levelers provide an operating range of 5″above dock, with a minimum lip projection of 12 3/4″ and an overall span of 27 3/4″.
• Broad center plate and lip are constructed of 55000lb. minimum yield steel tread plate.
• Grease fittings on continuous lip hinge are standard with each unit.

Retem Hydraulics manufactures the most powerful well known paint mixers.

• The dock seal is designed to provide a virtually air tight seal between the trailer and building. Even the gaps between the trailer doors and bodies are sealed.
• The dock shelter is manufactured with galvanized framing, providing durability. It can accommodate a wide variety of trailer sizes while providing full unimpeded access to the back of the trailer.